GAPTEC-Electronic
GAPTEC-Electronic 1MD8A_2412S3UP DC-DC converter
MPN: 1MD8A_2412S3UP
GAPTEC-Electronic 1MD8A_2412S3UP is a DC-DC converter from the 1MD8A_3UP (1W) series. The specified input voltage range is 21.6V to 26.4V. The output voltage is 12V. The listed power rating is 996 mW. The maximum output current is listed as 83mA. The listed efficiency is 78%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 0.45" L x 0.39" W x 0.21" H (11.5mm x 9.8mm x 5.4mm); Package / Case: 8-DIP Module, 4 Leads; Number of Outputs: 1; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Current - Output (Max) | 83mA |
| Efficiency | 78% |
| Manufacturer | GAPTEC Electronic |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40°C ~ 85°C |
| Package | Tube |
| Package / Case | 8-DIP Module, 4 Leads |
| Power (Watts) | 996 mW |
| Series | 1MD8A_3UP (1W) |
| Size / Dimension | 0.45" L x 0.39" W x 0.21" H (11.5mm x 9.8mm x 5.4mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 26.4V |
| Voltage - Input (Min) | 21.6V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 12V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements