Artesyn-Embedded-Power
Artesyn-Embedded-Power AGF800-48D3005-6L DC-DC converter
MPN: AGF800-48D3005-6L
Artesyn-Embedded-Power AGF800-48D3005-6L is a DC-DC converter from the AGF800 (800W) series. The specified input voltage range is 36V to 75V. The output voltage is 30V. The listed power rating is 799 W. The maximum output current is listed as 23.3A, 20A. The listed efficiency is 93.5%. The specified isolation voltage is 1.5 kV. The operating temperature range is -45°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: 5V; Type: Isolated Module; Standard Number: 60950-1; 62368-1; Size / Dimension: 4.60" L x 2.40" W x 0.50" H (116.8mm x 61.0mm x 12.7mm); Package / Case: Full Brick; Number of Outputs: 1; Features: Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CE, cUL, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CE, cUL, TUV, UL |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 23.3 A, 20 A |
| Efficiency | 93.5 % |
| Features | Remote On/Off, Remote Sense |
| Manufacturer | Artesyn Embedded Power |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -45 °C ~ 85 °C |
| Package | Box |
| Package / Case | Full Brick |
| Power (Watts) | 799 W |
| Series | AGF800 (800 W) |
| Size / Dimension | 4.60" L x 2.40" W x 0.50" H (116.8 mm x 61.0 mm x 12.7 mm) |
| Standard Number | 60950-1; 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 30 V |
| Voltage - Output 2 | 5 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements