ABB-Power-Conversion
ABB-Power-Conversion AXH003A0XZ DC-DC converter
MPN: AXH003A0XZ
ABB-Power-Conversion AXH003A0XZ is a DC-DC converter from the Austin MiniLynx™ series. The specified input voltage range is 2.4V to 5.5V. The output voltage is 0.8 ~ 3.6V. The listed power rating is 10 W. The maximum output current is listed as 3A. The listed efficiency is 94%. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 0.90" L x 0.26" W x 0.40" H (22.9mm x 6.6mm x 10.2mm); Package / Case: 5-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, UVLO; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Base Product Number | AXH003 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 3 A |
| Efficiency | 94 % |
| Features | Remote On/Off, OCP, OTP, UVLO |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Bulk |
| Package / Case | 5-SIP Module |
| Power (Watts) | 10 W |
| Series | Austin MiniLynx™ |
| Size / Dimension | 0.90" L x 0.26" W x 0.40" H (22.9 mm x 6.6 mm x 10.2 mm) |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 5.5 V |
| Voltage - Input (Min) | 2.4 V |
| Voltage - Output 1 | 0.8 ~ 3.6 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements