Flex-Power-Modules
Flex-Power-Modules BMR4612101-001 DC-DC converter
MPN: BMR4612101-001
Flex-Power-Modules BMR4612101-001 is a DC-DC converter from the BMR461 (60W) series. The specified input voltage range is 4.5V to 14V. The output voltage is 0.6 ~ 5V. The listed power rating is 30 W. The maximum output current is listed as 6A. The listed efficiency is 95.6%. The operating temperature range is -40°C ~ 120°C (With Derating). The mounting configuration is Surface Mount. Additional technical characteristics: Type: Non-Isolated PoL Module, Digital; Standard Number: 62368-1; Size / Dimension: 0.48" L x 0.48" W x 0.31" H (12.2mm x 12.2mm x 8.0mm); Package / Case: 32-BLGA Module; Number of Outputs: 1; Features: Adjustable Output, PMBus™, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | BMR461 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6 A |
| Efficiency | 95.6 % |
| Features | Adjustable Output, PMBus™, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 120 °C (With Derating) |
| Package | Tape & Reel (TR) |
| Package / Case | 32-BLGA Module |
| Power (Watts) | 30 W |
| Series | BMR461 (60 W) |
| Size / Dimension | 0.48" L x 0.48" W x 0.31" H (12.2 mm x 12.2 mm x 8.0 mm) |
| Standard Number | 62368-1 |
| Type | Non-Isolated PoL Module, Digital |
| Voltage - Input (Max) | 14 V |
| Voltage - Input (Min) | 4.5 V |
| Voltage - Output 1 | 0.6 ~ 5 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements