Flex-Power-Modules
Flex-Power-Modules BMR4802112-032 DC-DC converter
MPN: BMR4802112-032
Flex-Power-Modules BMR4802112-032 is a DC-DC converter from the BMR480 (900W) series. The specified input voltage range is 40V to 60V. The output voltage is 12.1V. The listed power rating is 908 W. The maximum output current is listed as 75A. The listed efficiency is 96.9%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Intermediate Bus Converter, Digital; Standard Number: 62368-1; Size / Dimension: 2.30" L x 1.45" W x 0.57" H (58.4mm x 36.8mm x 14.5mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Load Sharing, PMBus™, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | BMR480 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 75 A |
| Efficiency | 96.9 % |
| Features | Adjustable Output, Baseplate, Load Sharing, PMBus™, Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 125 °C (With Derating) |
| Package | Tray |
| Package / Case | Quarter Brick |
| Power (Watts) | 908 W |
| Series | BMR480 (900 W) |
| Size / Dimension | 2.30" L x 1.45" W x 0.57" H (58.4 mm x 36.8 mm x 14.5 mm) |
| Standard Number | 62368-1 |
| Type | Intermediate Bus Converter, Digital |
| Voltage - Input (Max) | 60 V |
| Voltage - Input (Min) | 40 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 12.1 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements