TDK-Lambda
TDK-Lambda CN100A245-CO2 DC-DC converter
MPN: CN100A245-CO2
TDK-Lambda CN100A245-CO2 is a DC-DC converter from the CN-A24 series. The specified input voltage range is 14.4V to 36V. The output voltage is 5V. The listed power rating is 100W. The maximum output current is listed as 20A. The listed efficiency is 86%. The specified isolation voltage is 3kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.28" L x 1.45" W x 0.50" H (57.9mm x 36.8mm x 12.7mm); Packaging: Bulk; Package / Case: 8-DIP Module, 1/4 Brick; Other Names: CN100A24-5/CO2; Number of Outputs: 1; Features: Remote On/Off, OCP, OVP; Detailed Description: Isolated Module DC DC Converter 1 Output 5V 20A 14.4V - 36V Input; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 20 A |
| Detailed Description | Isolated Module DC DC Converter 1 Output 5 V 20 A 14.4 V - 36 V Input |
| Efficiency | 86 % |
| Features | Remote On/Off, OCP, OVP |
| Manufacturer | TDK-Lambda, Inc. |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 100 °C |
| Other Names | CN100 A24-5/CO2 |
| Package / Case | 8-DIP Module, 1/4 Brick |
| Packaging | Bulk |
| Power (Watts) | 100 W |
| Series | CN-A24 |
| Size / Dimension | 2.28" L x 1.45" W x 0.50" H (57.9 mm x 36.8 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 14.4 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 5 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements