Delta-Electronics
Delta-Electronics E48SH3R330NRFH DC-DC converter
MPN: E48SH3R330NRFH
Delta-Electronics E48SH3R330NRFH is a DC-DC converter from the Delphi E48SH series. The specified input voltage range is 36V to 75V. The output voltage is 3.3V. The listed power rating is 120W. The maximum output current is listed as 30A. The listed efficiency is 92%. The specified isolation voltage is 2.25kV. The operating temperature range is -40°C ~ 125°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.30" L x 22.8" W x 0.35" H (58.4mm x 22.8mm x 9.0mm); Packaging: Tray; Package / Case: 8-DIP Module, 1/8 Brick; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP, UVLO; Detailed Description: Isolated Module DC DC Converter 1 Output 3.3V 30A 36V - 75V Input; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 30 A |
| Detailed Description | Isolated Module DC DC Converter 1 Output 3.3 V 30 A 36 V - 75 V Input |
| Efficiency | 92 % |
| Features | Remote On/Off, OCP, OTP, OVP, UVLO |
| Manufacturer | Delta Electronics |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 125 °C |
| Package / Case | 8-DIP Module, 1/8 Brick |
| Packaging | Tray |
| Power (Watts) | 120 W |
| Series | Delphi E48SH |
| Size / Dimension | 2.30" L x 22.8" W x 0.35" H (58.4 mm x 22.8 mm x 9.0 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 2.25 kV |
| Voltage - Output 1 | 3.3 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements