P-DUKE-Technology,Inc
P-DUKE-Technology,Inc FED20-24S3P3W DC-DC converter
MPN: FED20-24S3P3W
P-DUKE-Technology,Inc FED20-24S3P3W is a DC-DC converter from the FED20W (20W) series. The specified input voltage range is 9V to 36V. The output voltage is 3.3V. The listed power rating is 18 W. The maximum output current is listed as 5.5A. The listed efficiency is 85%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 60950-1; 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm); Package / Case: 6-DIP Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active High; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CE, cURus |
| Base Product Number | FED20 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 5.5 A |
| Efficiency | 85 % |
| Features | Adjustable Output, Remote On/Off, Remote Sense |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 105 °C (With Derating) |
| Package | Tube |
| Package / Case | 6-DIP Module |
| Power (Watts) | 18 W |
| Series | FED20 W (20 W) |
| Size / Dimension | 2.00" L x 1.00" W x 0.40" H (50.8 mm x 25.4 mm x 10.2 mm) |
| Standard Number | 60950-1; 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 9 V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 3.3 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements