P-DUKE-Technology,Inc
P-DUKE-Technology,Inc FED30-24T0515W DC-DC converter
MPN: FED30-24T0515W
P-DUKE-Technology,Inc FED30-24T0515W is a DC-DC converter from the FED30W (30W) series. The specified input voltage range is 9V to 36V. The output voltage is 5V. The listed power rating is 3 W. The maximum output current is listed as 400mA, 33mA, 33mA. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 85°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -15V; Voltage - Output 2: 15V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm); Package / Case: 6-DIP Module; Number of Outputs: 3; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CE, cURus |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 400 mA, 33 mA, 33 mA |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 3 |
| Operating Temperature | -40 °C ~ 85 °C (With Derating) |
| Package | Tube |
| Package / Case | 6-DIP Module |
| Power (Watts) | 3 W |
| Series | FED30 W (30 W) |
| Size / Dimension | 2.00" L x 1.00" W x 0.40" H (50.8 mm x 25.4 mm x 10.2 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 9 V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 5 V |
| Voltage - Output 2 | 15 V |
| Voltage - Output 3 | -15 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements