P-DUKE-Technology,Inc
P-DUKE-Technology,Inc HAE200-24S24W DC-DC converter
MPN: HAE200-24S24W
P-DUKE-Technology,Inc HAE200-24S24W is a DC-DC converter from the HAE200W (240W) series. The specified input voltage range is 8.5V to 36V. The output voltage is 24V. The listed power rating is 180 W. The maximum output current is listed as 7.5A. The listed efficiency is 90%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 60950-1; Size / Dimension: 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm); Package / Case: Half Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CE, cURus |
| Base Product Number | HAE200 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 7.5A |
| Efficiency | 90% |
| Features | Adjustable Output, Baseplate, Remote On/Off, Remote Sense |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40°C ~ 105°C (With Derating) |
| Package | Box |
| Package / Case | Half Brick |
| Power (Watts) | 180 W |
| Series | HAE200W (240W) |
| Size / Dimension | 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm) |
| Standard Number | 60950-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 36V |
| Voltage - Input (Min) | 8.5V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 24V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements