ABB-Power-Conversion
ABB-Power-Conversion JC075F1 DC-DC converter
MPN: JC075F1
ABB-Power-Conversion JC075F1 is a DC-DC converter from the JC075 (50W) series. The specified input voltage range is 18V to 36V. The output voltage is 3.3V. The listed power rating is 50 W. The maximum output current is listed as 15A. The listed efficiency is 81%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.40' L x 2.28' W x 0.50' H (61.0mm x 57.9mm x 12.7mm); Package / Case: 9-DIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 15 A |
| Efficiency | 81 % |
| Features | Remote On/Off, OCP, OTP, OVP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 100 °C |
| Package | Bulk |
| Package / Case | 9-DIP Module |
| Power (Watts) | 50 W |
| Series | JC075 (50 W) |
| Size / Dimension | 2.40' L x 2.28' W x 0.50' H (61.0 mm x 57.9 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 3.3 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements