XP-Power JTF0848D12 is a DC-DC converter from the JTF (8W) series. The specified input voltage range is 18V to 75V. The output voltage is 12V. The listed power rating is 8 W. The maximum output current is listed as 335mA, 335mA. The listed efficiency is 87%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 105°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -12V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm); Package / Case: 24-DIP Module, 9 Leads; Number of Outputs: 2; Features: Remote On/Off, OCP, OVP, SCP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Base Product Number | JTF0848 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 335mA, 335mA |
| Efficiency | 87% |
| Features | Remote On/Off, OCP, OVP, SCP |
| Manufacturer | XP Power |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40°C ~ 105°C |
| Package | Tube |
| Package / Case | 24-DIP Module, 9 Leads |
| Power (Watts) | 8 W |
| Series | JTF (8W) |
| Size / Dimension | 1.25" L x 0.80" W x 0.40" H (31.8mm x 20.3mm x 10.2mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75V |
| Voltage - Input (Min) | 18V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 12V |
| Voltage - Output 2 | -12V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements