ABB-Power-Conversion
ABB-Power-Conversion JW050B1 DC-DC converter
MPN: JW050B1
ABB-Power-Conversion JW050B1 is a DC-DC converter from the JW050 (50W) series. The specified input voltage range is 36V to 75V. The output voltage is 12V. The listed power rating is 50 W. The maximum output current is listed as 4.2A. The listed efficiency is 85%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.40' L x 2.28' W x 0.50' H (61.0mm x 57.9mm x 12.7mm); Package / Case: 9-DIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 4.2A |
| Efficiency | 85% |
| Features | Remote On/Off, OCP, OVP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40°C ~ 100°C |
| Package | Bulk |
| Package / Case | 9-DIP Module |
| Power (Watts) | 50 W |
| Series | JW050 (50W) |
| Size / Dimension | 2.40' L x 2.28' W x 0.50' H (61.0mm x 57.9mm x 12.7mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75V |
| Voltage - Input (Min) | 36V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 12V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements