Astrodyne-TDI NV300-5LF is a DC-DC converter from the NV300LF (300W) series. The specified input voltage range is 220V to 400V. The output voltage is 5V. The listed power rating is 100 W. The maximum output current is listed as 20A. The listed efficiency is 86%. The specified isolation voltage is 4.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 60950-1; Size / Dimension: 2.40" L x 2.30" W x 0.42" H (61.0mm x 58.4mm x 10.7mm); Package / Case: Half Brick; Number of Outputs: 1; Features: Baseplate, Heat Sink, Remote On/Off; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active High |
| Current - Output (Max) | 20A |
| Efficiency | 86% |
| Features | Baseplate, Heat Sink, Remote On/Off |
| Manufacturer | Astrodyne TDI |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40°C ~ 100°C |
| Package | Tape & Box (TB) |
| Package / Case | Half Brick |
| Power (Watts) | 100 W |
| Series | NV300LF (300W) |
| Size / Dimension | 2.40" L x 2.30" W x 0.42" H (61.0mm x 58.4mm x 10.7mm) |
| Standard Number | 60950-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 400V |
| Voltage - Input (Min) | 220V |
| Voltage - Isolation | 4.5 kV |
| Voltage - Output 1 | 5V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements