Flex-Power-Modules
Flex-Power-Modules PKB4204PIHS DC-DC converter
MPN: PKB4204PIHS
Flex-Power-Modules PKB4204PIHS is a DC-DC converter from the PKB4204 (240W) series. The specified input voltage range is 40V to 75V. The output voltage is 12V. The listed power rating is 240 W. The maximum output current is listed as 20A. The listed efficiency is 95.5%. The specified isolation voltage is 1.5 kV. The operating temperature range is -30°C ~ 90°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Intermediate Bus Converter; Standard Number: 62368-1; Size / Dimension: 2.30" L x 0.89" W x 0.50" H (58.4mm x 22.7mm x 12.7mm); Package / Case: Eighth Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKB420 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 20 A |
| Efficiency | 95.5 % |
| Features | Adjustable Output, Baseplate, Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -30 °C ~ 90 °C (With Derating) |
| Package | Tray |
| Package / Case | Eighth Brick |
| Power (Watts) | 240 W |
| Series | PKB4204 (240 W) |
| Size / Dimension | 2.30" L x 0.89" W x 0.50" H (58.4 mm x 22.7 mm x 12.7 mm) |
| Standard Number | 62368-1 |
| Type | Intermediate Bus Converter |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 40 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 12 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements