Flex-Power-Modules
Flex-Power-Modules PKB4216CPIHS DC-DC converter
MPN: PKB4216CPIHS
Flex-Power-Modules PKB4216CPIHS is a DC-DC converter from the PKB4216C (200W) series. The specified input voltage range is 36V to 75V. The output voltage is 30V. The listed power rating is 200 W. The maximum output current is listed as 6.7A. The listed efficiency is 95.1%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.30" L x 0.89" W x 0.52" H (58.4mm x 22.7mm x 13.2mm); Package / Case: Eighth Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKB421 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6.7 A |
| Efficiency | 95.1 % |
| Features | Adjustable Output, Baseplate, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 125 °C (With Derating) |
| Package | Tray |
| Package / Case | Eighth Brick |
| Power (Watts) | 200 W |
| Series | PKB4216C (200 W) |
| Size / Dimension | 2.30" L x 0.89" W x 0.52" H (58.4 mm x 22.7 mm x 13.2 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 30 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements