Flex-Power-Modules
Flex-Power-Modules PKE5225PI DC-DC converter
MPN: PKE5225PI
Flex-Power-Modules PKE5225PI is a DC-DC converter from the PKE 5220 (15W) series. The specified input voltage range is 18V to 75V. The output voltage is 15V. The listed power rating is 15 W. The maximum output current is listed as 500mA, 500mA. The listed efficiency is 89%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 115°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -15V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.00" L x 1.00" W x 0.43" H (25.4mm x 25.4mm x 10.8mm); Package / Case: 6-DIP Module; Number of Outputs: 2; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKE522 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 500mA, 500mA |
| Efficiency | 89% |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40°C ~ 115°C (With Derating) |
| Package | Tray |
| Package / Case | 6-DIP Module |
| Power (Watts) | 15 W |
| Series | PKE 5220 (15W) |
| Size / Dimension | 1.00" L x 1.00" W x 0.43" H (25.4mm x 25.4mm x 10.8mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75V |
| Voltage - Input (Min) | 18V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 15V |
| Voltage - Output 2 | -15V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements