Flex-Power-Modules
Flex-Power-Modules PKM4613NHPI DC-DC converter
MPN: PKM4613NHPI
Flex-Power-Modules PKM4613NHPI is a DC-DC converter from the PKM4000NH (600W) series. The specified input voltage range is 36V to 75V. The output voltage is 12V. The listed power rating is 600 W. The maximum output current is listed as 50A. The listed efficiency is 96.5%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Intermediate Bus Converter; Standard Number: 62368-1; Size / Dimension: 2.28" L x 1.45" W x 0.45" H (57.9mm x 36.8mm x 11.4mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKM461 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 50 A |
| Efficiency | 96.5 % |
| Features | Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 125 °C (With Derating) |
| Package | Tray |
| Package / Case | Quarter Brick |
| Power (Watts) | 600 W |
| Series | PKM4000NH (600 W) |
| Size / Dimension | 2.28" L x 1.45" W x 0.45" H (57.9 mm x 36.8 mm x 11.4 mm) |
| Standard Number | 62368-1 |
| Type | Intermediate Bus Converter |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 2.25 kV |
| Voltage - Output 1 | 12 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements