Flex-Power-Modules PKU4110DPI DC-DC converter

Name: Flex-Power-Modules PKU4110DPI DC-DC converter
Brand: Flex-Power-Modules

MPN: PKU4110DPI

Flex-Power-Modules PKU4110DPI is a DC-DC converter from the PKU4110D (150W) series. The specified input voltage range is 36V to 75V. The output voltage is 3.3V. The listed power rating is 100 W. The maximum output current is listed as 30.3A. The listed efficiency is 93.7%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.30" L x 0.90" W x 0.44" H (33.0mm x 22.9mm x 11.3mm); Package / Case: Sixteenth Brick; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

Applications	ITE (Commercial)
Approval Agency	CB, CSA, IEC, TUV, UL
Base Product Number	PKU411
Control Features	Enable, Active Low
Current - Output (Max)	30.3A
Efficiency	93.7%
Features	Adjustable Output, Remote On/Off, Remote Sense
Manufacturer	Flex Power Modules
Moisture Sensitivity Level (MSL)	Not Applicable
Mounting Type	Through Hole
Number of Outputs	1
Operating Temperature	-40°C ~ 125°C (With Derating)
Package	Tray
Package / Case	Sixteenth Brick
Power (Watts)	100 W
Series	PKU4110D (150W)
Size / Dimension	1.30" L x 0.90" W x 0.44" H (33.0mm x 22.9mm x 11.3mm)
Standard Number	62368-1
Type	Isolated Module
Voltage - Input (Max)	75V
Voltage - Input (Min)	36V
Voltage - Isolation	2.25 kV
Voltage - Output 1	3.3V

Before ordering

Minimum and maximum supply voltage, including transients
Continuous and peak load, cooling and ambient temperature
Isolation, mechanical envelope and mounting requirements