Flex-Power-Modules
Flex-Power-Modules PKU4217DPI DC-DC converter
MPN: PKU4217DPI
Flex-Power-Modules PKU4217DPI is a DC-DC converter from the PKU4217D (260W) series. The specified input voltage range is 36V to 60V. The output voltage is 10.4V. The listed power rating is 260 W. The maximum output current is listed as 25A. The listed efficiency is 96.1%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Intermediate Bus Converter; Standard Number: 62368-1; Size / Dimension: 1.30" L x 0.90" W x 0.44" H (33.0mm x 22.9mm x 11.3mm); Package / Case: Sixteenth Brick; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKU421 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 25A |
| Efficiency | 96.1% |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40°C ~ 125°C (With Derating) |
| Package | Tray |
| Package / Case | Sixteenth Brick |
| Power (Watts) | 260 W |
| Series | PKU4217D (260W) |
| Size / Dimension | 1.30" L x 0.90" W x 0.44" H (33.0mm x 22.9mm x 11.3mm) |
| Standard Number | 62368-1 |
| Type | Intermediate Bus Converter |
| Voltage - Input (Max) | 60V |
| Voltage - Input (Min) | 36V |
| Voltage - Isolation | 2.25 kV |
| Voltage - Output 1 | 10.4V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements