TDK-Lambda,Inc PXF4048T0512 is a DC-DC converter from the PXF series. The specified input voltage range is 36V to 75V. The output voltage is 5V. The listed power rating is 40W. The maximum output current is listed as 6A, 400mA, 400mA. The listed efficiency is 88%. The specified isolation voltage is 1.6kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -12V; Voltage - Output 2: 12V; Type: Isolated Module; Size / Dimension: 2.00" L x 2.00" W x 0.40" H (50.8mm x 50.8mm x 8.6mm); Packaging: Bulk; Package / Case: 9-DIP Module; Other Names: 285-1571 PXF40-48T0512; Number of Outputs: 3; Features: Remote On/Off, OCP, OVP, SCP; Detailed Description: Isolated Module DC DC Converter 3 Output 5V 12V -12V 6A, 400mA, 400mA 36V - 75V Input; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Current - Output (Max) | 6A, 400mA, 400mA |
| Detailed Description | Isolated Module DC DC Converter 3 Output 5V 12V -12V 6A, 400mA, 400mA 36V - 75V Input |
| Efficiency | 88% |
| Features | Remote On/Off, OCP, OVP, SCP |
| Manufacturer | TDK-Lambda, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 3 |
| Operating Temperature | -40°C ~ 100°C |
| Other Names | 285-1571 PXF40-48T0512 |
| Package / Case | 9-DIP Module |
| Packaging | Bulk |
| Power (Watts) | 40W |
| Series | PXF |
| Size / Dimension | 2.00" L x 2.00" W x 0.40" H (50.8mm x 50.8mm x 8.6mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75V |
| Voltage - Input (Min) | 36V |
| Voltage - Isolation | 1.6kV |
| Voltage - Output 1 | 5V |
| Voltage - Output 2 | 12V |
| Voltage - Output 3 | -12V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements