P-DUKE-Technology,Inc
P-DUKE-Technology,Inc RCD10-110D15W DC-DC converter
MPN: RCD10-110D15W
P-DUKE-Technology,Inc RCD10-110D15W is a DC-DC converter from the RCD10W (10W) series. The specified input voltage range is 36V to 160V. The output voltage is 15V. The listed power rating is 10 W. The maximum output current is listed as 333mA, 333mA. The listed efficiency is 89%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -15V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm); Package / Case: 6-DIP Module; Number of Outputs: 2; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial), Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial), Railway |
|---|---|
| Approval Agency | CB, CE, cURus |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 333mA, 333mA |
| Efficiency | 89% |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40°C ~ 105°C (With Derating) |
| Package | Tube |
| Package / Case | 6-DIP Module |
| Power (Watts) | 10 W |
| Series | RCD10W (10W) |
| Size / Dimension | 1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 160V |
| Voltage - Input (Min) | 36V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 15V |
| Voltage - Output 2 | -15V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements