P-DUKE-Technology,Inc
P-DUKE-Technology,Inc RCD15-110D12W DC-DC converter
MPN: RCD15-110D12W
P-DUKE-Technology,Inc RCD15-110D12W is a DC-DC converter from the RCD15W (15W) series. The specified input voltage range is 36V to 160V. The output voltage is 12V. The listed power rating is 15 W. The maximum output current is listed as 625mA, 625mA. The listed efficiency is 89%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -12V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm); Package / Case: 6-DIP Module; Number of Outputs: 2; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial), Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial), Railway |
|---|---|
| Approval Agency | CB, CE, cURus |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 625mA, 625mA |
| Efficiency | 89% |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40°C ~ 105°C (With Derating) |
| Package | Tube |
| Package / Case | 6-DIP Module |
| Power (Watts) | 15 W |
| Series | RCD15W (15W) |
| Size / Dimension | 1.00" L x 1.00" W x 0.39" H (25.4mm x 25.4mm x 9.9mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 160V |
| Voltage - Input (Min) | 36V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 12V |
| Voltage - Output 2 | -12V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements