Bel-Power-Solutions
Bel-Power-Solutions UIE48T10120-NDABG DC-DC converter
MPN: UIE48T10120-NDABG
Bel-Power-Solutions UIE48T10120-NDABG is a DC-DC converter from the UIB (120W) series. The specified input voltage range is 18V to 75V. The output voltage is 12V. The listed power rating is 120 W. The maximum output current is listed as 10A. The listed efficiency is 92.5%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.30" L x 0.90" W x 0.50" H (58.4mm x 22.9mm x 12.7mm); Package / Case: 8-DIP Module, 1/8 Brick; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP, UVLO; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 10 A |
| Efficiency | 92.5 % |
| Features | Remote On/Off, OCP, OTP, OVP, UVLO |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Tray |
| Package / Case | 8-DIP Module, 1/8 Brick |
| Power (Watts) | 120 W |
| Series | UIB (120 W) |
| Size / Dimension | 2.30" L x 0.90" W x 0.50" H (58.4 mm x 22.9 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 2.25 kV |
| Voltage - Output 1 | 12 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements