P-DUKE-Technology,Inc
P-DUKE-Technology,Inc FED30-48T3312W DC-DC converter
MPN: FED30-48T3312W
P-DUKE-Technology,Inc FED30-48T3312W is a DC-DC converter from the FED30W (30W) series. The specified input voltage range is 18V to 75V. The output voltage is 3.3V. The listed power rating is 2.7 W. The maximum output current is listed as 500mA, 42mA, 42mA. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 85°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -12V; Voltage - Output 2: 12V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm); Package / Case: 6-DIP Module; Number of Outputs: 3; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CE, cURus |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 500 mA, 42 mA, 42 mA |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 3 |
| Operating Temperature | -40 °C ~ 85 °C (With Derating) |
| Package | Tube |
| Package / Case | 6-DIP Module |
| Power (Watts) | 2.7 W |
| Series | FED30 W (30 W) |
| Size / Dimension | 2.00" L x 1.00" W x 0.40" H (50.8 mm x 25.4 mm x 10.2 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 3.3 V |
| Voltage - Output 2 | 12 V |
| Voltage - Output 3 | -12 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements