Flex-Power-Modules
Flex-Power-Modules PKE7311API DC-DC converter
MPN: PKE7311API
Flex-Power-Modules PKE7311API is a DC-DC converter from the PKE 7000A (30W) series. The specified input voltage range is 43V to 160V. The output voltage is 5V. The listed power rating is 30 W. The maximum output current is listed as 6A. The listed efficiency is 91%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 110°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 50155; 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.47" H (50.8mm x 25.4mm x 11.9mm); Package / Case: 6-DIP Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, EN, IEC, TUV, UL; Applications: ITE (Commercial), Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial), Railway |
|---|---|
| Approval Agency | CB, CSA, EN, IEC, TUV, UL |
| Base Product Number | PKE731 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6 A |
| Efficiency | 91 % |
| Features | Adjustable Output, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 110 °C (With Derating) |
| Package | Tray |
| Package / Case | 6-DIP Module |
| Power (Watts) | 30 W |
| Series | PKE 7000 A (30 W) |
| Size / Dimension | 2.00" L x 1.00" W x 0.47" H (50.8 mm x 25.4 mm x 11.9 mm) |
| Standard Number | 50155; 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 160 V |
| Voltage - Input (Min) | 43 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 5 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements