Flex-Power-Modules
Flex-Power-Modules PKM7116JAPIPLHS DC-DC converter
MPN: PKM7116JAPIPLHS
Flex-Power-Modules PKM7116JAPIPLHS is a DC-DC converter from the PKM 7000A (150W) series. The specified input voltage range is 66V to 160V. The output voltage is 48V. The listed power rating is 100 W. The maximum output current is listed as 2.08A. The listed efficiency is 90%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 115°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 50155; 62368-1; Size / Dimension: 2.28" L x 1.45" W x 1.01" H (57.9mm x 36.8mm x 25.6mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Heat Sink, Remote On/Off, Remote Sense; Control Features: Enable, Active High; Approval Agency: CB, CSA, EN, IEC, TUV, UL; Applications: ITE (Commercial), Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial), Railway |
|---|---|
| Approval Agency | CB, CSA, EN, IEC, TUV, UL |
| Base Product Number | PKM711 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 2.08 A |
| Efficiency | 90 % |
| Features | Adjustable Output, Heat Sink, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 115 °C (With Derating) |
| Package | Tray |
| Package / Case | Quarter Brick |
| Power (Watts) | 100 W |
| Series | PKM 7000 A (150 W) |
| Size / Dimension | 2.28" L x 1.45" W x 1.01" H (57.9 mm x 36.8 mm x 25.6 mm) |
| Standard Number | 50155; 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 160 V |
| Voltage - Input (Min) | 66 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 48 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements