Flex-Power-Modules
Flex-Power-Modules PKU5516ZSPI DC-DC converter
MPN: PKU5516ZSPI
Flex-Power-Modules PKU5516ZSPI is a DC-DC converter from the PKU 5500S (50W) series. The specified input voltage range is 18V to 75V. The output voltage is 24V. The listed power rating is 50 W. The maximum output current is listed as 2.1A. The listed efficiency is 91%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 100°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.39" L x 0.98" W x 0.41" H (35.3mm x 25.0mm x 10.4mm); Package / Case: Sixteenth Brick; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CSA, IEC, TUV, UL |
| Base Product Number | PKU551 |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 2.1 A |
| Efficiency | 91 % |
| Features | Adjustable Output, Remote On/Off, Remote Sense |
| Manufacturer | Flex Power Modules |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 100 °C (With Derating) |
| Package | Tray |
| Package / Case | Sixteenth Brick |
| Power (Watts) | 50 W |
| Series | PKU 5500S (50 W) |
| Size / Dimension | 1.39" L x 0.98" W x 0.41" H (35.3 mm x 25.0 mm x 10.4 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 2.25 kV |
| Voltage - Output 1 | 24 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements