Bel-Power-Solutions
Bel-Power-Solutions 0RQB-50Y24LG DC-DC converter
MPN: 0RQB-50Y24LG

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Bel-Power-Solutions 0RQB-50Y24LG is a DC-DC converter from the 0RQB-50Y24x (50W) series. The specified input voltage range is 14.4V to 154V. The output voltage is 24V. The listed power rating is 50 W. The maximum output current is listed as 2.1A. The listed efficiency is 88%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module, Conformal Coated; Standard Number: 62368-1; Size / Dimension: 2.30" L x 1.45" W x 0.59" H (58.4mm x 36.8mm x 15.0mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Baseplate, Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CSA, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CSA, UL |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 2.1 A |
| Efficiency | 88 % |
| Features | Baseplate, Remote On/Off |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 105 °C (With Derating) |
| Package | Tray |
| Package / Case | Quarter Brick |
| Power (Watts) | 50 W |
| Series | 0RQB-50Y24x (50 W) |
| Size / Dimension | 2.30" L x 1.45" W x 0.59" H (58.4 mm x 36.8 mm x 15.0 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module, Conformal Coated |
| Voltage - Input (Max) | 154 V |
| Voltage - Input (Min) | 14.4 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 24 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.