Bel-Power-Solutions
Bel-Power-Solutions 110IMY70-05-0ITZG DC-DC converter
MPN: 110IMY70-05-0ITZG

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Bel-Power-Solutions 110IMY70-05-0ITZG is a DC-DC converter from the Melcher IMY70 (70W) series. The specified input voltage range is 50V to 137.5V. The output voltage is 5.1V. The listed power rating is 70 W. The maximum output current is listed as 12A. The listed efficiency is 91%. The specified isolation voltage is 4.2 kV. The operating temperature range is -40°C ~ 95°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module, Conformal Coated; Size / Dimension: 2.87' L x 1.88' W x 0.38' H (72.8mm x 47.8mm x 9.8mm); Package / Case: 19-DIP Module, 17 Leads; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP, SCP, UVLO; Control Features: Enable, Active High; Applications: ITE (Commercial), Railway. These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial), Railway |
|---|---|
| Base Product Number | 110IMY70 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 12 A |
| Efficiency | 91 % |
| Features | Remote On/Off, OCP, OTP, OVP, SCP, UVLO |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 95 °C |
| Package | Bulk |
| Package / Case | 19-DIP Module, 17 Leads |
| Power (Watts) | 70 W |
| Series | Melcher IMY70 (70 W) |
| Size / Dimension | 2.87' L x 1.88' W x 0.38' H (72.8 mm x 47.8 mm x 9.8 mm) |
| Type | Isolated Module, Conformal Coated |
| Voltage - Input (Max) | 137.5 V |
| Voltage - Input (Min) | 50 V |
| Voltage - Isolation | 4.2 kV |
| Voltage - Output 1 | 5.1 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.