GAPTEC-Electronic
GAPTEC-Electronic 2.4S7SIC_152004D6UP DC-DC converter
MPN: 2.4S7SIC_152004D6UP
Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
GAPTEC-Electronic 2.4S7SIC_152004D6UP is a DC-DC converter from the 2.4S7SIC_152004D6UP (2.4W) series. The specified input voltage range is 13.5V to 16.5V. The output voltage is 20V. The listed power rating is 2.4 W. The maximum output current is listed as 100mA, 100mA. The listed efficiency is 83%. The specified isolation voltage is 6 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -4V; Type: Isolated Module; Standard Number: 60950-1; Size / Dimension: 0.77" L x 0.39" W x 0.49" H (19.5mm x 9.8mm x 12.5mm); Package / Case: 7-SIP Module, 5 Leads; Number of Outputs: 2; Approval Agency: cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | cURus |
| Current - Output (Max) | 100 mA, 100 mA |
| Efficiency | 83 % |
| Manufacturer | GAPTEC Electronic |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40 °C ~ 105 °C (With Derating) |
| Package | Tape & Reel (TR) |
| Package / Case | 7-SIP Module, 5 Leads |
| Power (Watts) | 2.4 W |
| Series | 2.4S7SIC_152004D6UP (2.4 W) |
| Size / Dimension | 0.77" L x 0.39" W x 0.49" H (19.5 mm x 9.8 mm x 12.5 mm) |
| Standard Number | 60950-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 16.5 V |
| Voltage - Input (Min) | 13.5 V |
| Voltage - Isolation | 6 kV |
| Voltage - Output 1 | 20 V |
| Voltage - Output 2 | -4 V |
Before ordering
- Minimum and maximum supply voltage, including transients
- Continuous and peak load, cooling and ambient temperature
- Isolation, mechanical envelope and mounting requirements