Artesyn-Embedded-Power

Artesyn-Embedded-Power ADO500-48S10-4L DC-DC converter

MPN: ADO500-48S10-4L

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Artesyn-Embedded-Power ADO500-48S10-4L is a DC-DC converter from the ADO500 (500W) series. The specified input voltage range is 45V to 56V. The output voltage is 10.1V. The listed power rating is 505 W. The maximum output current is listed as 50A. The listed efficiency is 96.5%. The specified isolation voltage is 800 V. The operating temperature range is -20°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 60950-1; 62368-1; Size / Dimension: 2.30" L x 0.91" W x 0.48" H (58.4mm x 23.2mm x 12.2mm); Package / Case: Eighth Brick; Number of Outputs: 1; Features: Remote On/Off; Control Features: Enable, Active Low; Approval Agency: CE, cUL, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCE, cUL, TUV, UL
Control FeaturesEnable, Active Low
Current - Output (Max)50 A
Efficiency96.5 %
FeaturesRemote On/Off
ManufacturerArtesyn Embedded Power
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-20 °C ~ 85 °C
PackageBox
Package / CaseEighth Brick
Power (Watts)505 W
SeriesADO500 (500 W)
Size / Dimension2.30" L x 0.91" W x 0.48" H (58.4 mm x 23.2 mm x 12.2 mm)
Standard Number60950-1; 62368-1
TypeIsolated Module
Voltage - Input (Max)56 V
Voltage - Input (Min)45 V
Voltage - Isolation800 V
Voltage - Output 110.1 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.