Aimtec
Aimtec AM10GH-2424NZ DC-DC converter
MPN: AM10GH-2424NZ
Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Aimtec AM10GH-2424NZ is a DC-DC converter from the AM10GH-NZ (10W) series. The specified input voltage range is 9V to 36V. The output voltage is 24V. The listed power rating is 10 W. The maximum output current is listed as 420mA. The listed efficiency is 86%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 0.87" L x 0.37" W x 0.47" H (22.0mm x 9.5mm x 12.0mm); Package / Case: 8-SIP Module; Number of Outputs: 1; Features: Remote On/Off; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Base Product Number | AM10G |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 420 mA |
| Efficiency | 86 % |
| Features | Remote On/Off |
| Manufacturer | Aimtec |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Tube |
| Package / Case | 8-SIP Module |
| Power (Watts) | 10 W |
| Series | AM10GH-NZ (10 W) |
| Size / Dimension | 0.87" L x 0.37" W x 0.47" H (22.0 mm x 9.5 mm x 12.0 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 36 V |
| Voltage - Input (Min) | 9 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 24 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.