ABB-Power-Conversion
ABB-Power-Conversion AXH010A0G DC-DC converter
MPN: AXH010A0G

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
ABB-Power-Conversion AXH010A0G is a DC-DC converter from the Austin Lynx™ series. The specified input voltage range is 3V to 5.5V. The output voltage is 2.5V. The listed power rating is 25 W. The maximum output current is listed as 10A. The listed efficiency is 92%. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.00" L x 0.32" W x 0.50" H (50.8mm x 8.1mm x 12.7mm); Package / Case: 11-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 10 A |
| Efficiency | 92 % |
| Features | Remote On/Off, OCP, OTP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Tray |
| Package / Case | 11-SIP Module |
| Power (Watts) | 25 W |
| Series | Austin Lynx™ |
| Size / Dimension | 2.00" L x 0.32" W x 0.50" H (50.8 mm x 8.1 mm x 12.7 mm) |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 5.5 V |
| Voltage - Input (Min) | 3 V |
| Voltage - Output 1 | 2.5 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.