Flex-Power-Modules

Flex-Power-Modules BMR4560104-001 DC-DC converter

MPN: BMR4560104-001

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Flex-Power-Modules BMR4560104-001 is a DC-DC converter from the BMR456 (468W) series. The specified input voltage range is 36V to 75V. The output voltage is 12V. The listed power rating is 420 W. The maximum output current is listed as 35A. The listed efficiency is 96.4%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 125°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module, Digital; Standard Number: 62368-1; Size / Dimension: 2.28" L x 1.45" W x 0.52" H (57.9mm x 36.8mm x 13.2mm); Package / Case: Quarter Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, PMBus™, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CB, CSA, IEC, TUV, UL; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCB, CSA, IEC, TUV, UL
Base Product NumberBMR456
Control FeaturesEnable, Active Low
Current - Output (Max)35 A
Efficiency96.4 %
FeaturesAdjustable Output, Baseplate, PMBus™, Remote On/Off, Remote Sense
ManufacturerFlex Power Modules
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 125 °C (With Derating)
PackageTray
Package / CaseQuarter Brick
Power (Watts)420 W
SeriesBMR456 (468 W)
Size / Dimension2.28" L x 1.45" W x 0.52" H (57.9 mm x 36.8 mm x 13.2 mm)
Standard Number62368-1
TypeIsolated Module, Digital
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation2.25 kV
Voltage - Output 112 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.