TDK-Lambda
TDK-Lambda CCG3-12-12DR DC-DC converter
MPN: CCG3-12-12DR

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
TDK-Lambda CCG3-12-12DR is a DC-DC converter from the CCG1R5-10 (3W) series. The specified input voltage range is 4.5V to 18V. The output voltage is 12V. The listed power rating is 3.1 W. The maximum output current is listed as 130mA, 130mA. The listed efficiency is 84%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C (With Derating). The mounting configuration is Surface Mount. Additional technical characteristics: Voltage - Output 2: -12V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 0.62" L x 0.41" W x 0.45" H (15.7mm x 10.4mm x 11.5mm); Package / Case: 6-SMD Module; Number of Outputs: 2; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 130 mA, 130 mA |
| Efficiency | 84 % |
| Features | Adjustable Output, Remote On/Off, Remote Sense |
| Manufacturer | TDK-Lambda, Inc. |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Surface Mount |
| Number of Outputs | 2 |
| Operating Temperature | -40 °C ~ 100 °C (With Derating) |
| Package | Tray |
| Package / Case | 6-SMD Module |
| Power (Watts) | 3.1 W |
| Series | CCG1R5-10 (3 W) |
| Size / Dimension | 0.62" L x 0.41" W x 0.45" H (15.7 mm x 10.4 mm x 11.5 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 18 V |
| Voltage - Input (Min) | 4.5 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 12 V |
| Voltage - Output 2 | -12 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.