TDK-Lambda
TDK-Lambda CN200B110-24 DC-DC converter
MPN: CN200B110-24

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
TDK-Lambda CN200B110-24 is a DC-DC converter from the CN-B110 (200W) series. The specified input voltage range is 43V to 160V. The output voltage is 24V. The listed power rating is 202 W. The maximum output current is listed as 8.4A. The listed efficiency is 90%. The specified isolation voltage is 3 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm); Package / Case: Half Brick; Number of Outputs: 1; Features: Adjustable Output, Baseplate, Load Sharing, Remote On/Off, Remote Sense; Control Features: Enable, Active Low; Approval Agency: CE, UKCA; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CE, UKCA |
| Control Features | Enable, Active Low |
| Current - Output (Max) | 8.4 A |
| Efficiency | 90 % |
| Features | Adjustable Output, Baseplate, Load Sharing, Remote On/Off, Remote Sense |
| Manufacturer | TDK-Lambda, Inc. |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 100 °C |
| Package | Bulk |
| Package / Case | Half Brick |
| Power (Watts) | 202 W |
| Series | CN-B110 (200 W) |
| Size / Dimension | 2.40" L x 2.28" W x 0.50" H (61.0 mm x 57.9 mm x 12.7 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 160 V |
| Voltage - Input (Min) | 43 V |
| Voltage - Isolation | 3 kV |
| Voltage - Output 1 | 24 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.