Bel-Power-Solutions
Bel-Power-Solutions DFC25E48T3.3-12 DC-DC converter
MPN: DFC25E48T3.3-12

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
Bel-Power-Solutions DFC25E48T3.3-12 is a DC-DC converter from the DFC (25W) series. The specified input voltage range is 36V to 72V. The output voltage is 3.3V. The listed power rating is 25 W. The maximum output current is listed as 5A, 1A, 1A. The listed efficiency is 78%. The specified isolation voltage is 1.544 kV. The operating temperature range is -25°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 3: -12V; Voltage - Output 2: 12V; Type: Isolated Module; Size / Dimension: 3.00" L x 2.50" W x 0.43" H (76.2mm x 63.5mm x 11.0mm); Package / Case: 9-DIP Module, 8 Leads; Number of Outputs: 3; Features: Remote On/Off, OCP, SCP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active High |
| Current - Output (Max) | 5 A, 1 A, 1 A |
| Efficiency | 78 % |
| Features | Remote On/Off, OCP, SCP |
| Manufacturer | Bel Power Solutions |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 3 |
| Operating Temperature | -25 °C ~ 85 °C |
| Package | Bulk |
| Package / Case | 9-DIP Module, 8 Leads |
| Power (Watts) | 25 W |
| Series | DFC (25 W) |
| Size / Dimension | 3.00" L x 2.50" W x 0.43" H (76.2 mm x 63.5 mm x 11.0 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 72 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.544 kV |
| Voltage - Output 1 | 3.3 V |
| Voltage - Output 2 | 12 V |
| Voltage - Output 3 | -12 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.