Murata-Power-Solutions

Murata-Power-Solutions DVE0240V2NC DC-DC converter

MPN: DVE0240V2NC

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

Murata-Power-Solutions DVE0240V2NC is a DC-DC converter from the DVE (300W) series. The specified input voltage range is 36V to 75V. The output voltage is 5V. The listed power rating is 200 W. The maximum output current is listed as 40A. The listed efficiency is 94%. The specified isolation voltage is 2.25 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.30' L x 0.90' W x 0.45' H (58.4mm x 22.9mm x 11.4mm); Package / Case: 16-DIP Module (15 Leads), 1/8 Brick; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP, SCP, UVLO; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Base Product NumberDVE0240 V2
Control FeaturesEnable, Active Low
Current - Output (Max)40 A
Efficiency94 %
FeaturesRemote On/Off, OCP, OTP, OVP, SCP, UVLO
ManufacturerMurata Power Solutions
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 85 °C
PackageTray
Package / Case16-DIP Module (15 Leads), 1/8 Brick
Power (Watts)200 W
SeriesDVE (300 W)
Size / Dimension2.30' L x 0.90' W x 0.45' H (58.4 mm x 22.9 mm x 11.4 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation2.25 kV
Voltage - Output 15 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.