ABB-Power-Conversion

ABB-Power-Conversion ESTW024A0A41-SZ DC-DC converter

MPN: ESTW024A0A41-SZ

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

ABB-Power-Conversion ESTW024A0A41-SZ is a DC-DC converter from the Barracuda™ ESTW024A0A series. The specified input voltage range is 36V to 75V. The output voltage is 5V. The listed power rating is 120W. The maximum output current is listed as 24A. The listed efficiency is 91.5%. The specified isolation voltage is 2.25kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Surface Mount. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.30" L x 0.90" W x 0.35" H (58.4mm x 22.9mm x 8.9mm); Packaging: Bulk; Package / Case: 8-SMD Module, 1/8 Brick; Other Names: 150037204 ESTW024A0A41SZ; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP, UVLO; Detailed Description: Isolated Module DC DC Converter 1 Output 5V 24A 36V - 75V Input; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Control FeaturesEnable, Active Low
Current - Output (Max)24 A
Detailed DescriptionIsolated Module DC DC Converter 1 Output 5 V 24 A 36 V - 75 V Input
Efficiency91.5 %
FeaturesRemote On/Off, OCP, OTP, OVP, UVLO
ManufacturerABB Power Conversion
Moisture Sensitivity Level (MSL)2 A (4 Weeks)
Mounting TypeSurface Mount
Number of Outputs1
Operating Temperature-40 °C ~ 85 °C
Other Names150037204 ESTW024 A0 A41SZ
Package / Case8-SMD Module, 1/8 Brick
PackagingBulk
Power (Watts)120 W
SeriesBarracuda™ ESTW024 A0 A
Size / Dimension2.30" L x 0.90" W x 0.35" H (58.4 mm x 22.9 mm x 8.9 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation2.25 kV
Voltage - Output 15 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.