P-DUKE-Technology,Inc

P-DUKE-Technology,Inc FED20-24D15W DC-DC converter

MPN: FED20-24D15W

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

P-DUKE-Technology,Inc FED20-24D15W is a DC-DC converter from the FED20W (20W) series. The specified input voltage range is 9V to 36V. The output voltage is 15V. The listed power rating is 20 W. The maximum output current is listed as 667mA, 667mA. The listed efficiency is 88%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -15V; Type: Isolated Module; Standard Number: 60950-1; 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm); Package / Case: 6-DIP Module; Number of Outputs: 2; Features: Adjustable Output, Remote On/Off, Remote Sense; Control Features: Enable, Active High; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Approval AgencyCB, CE, cURus
Base Product NumberFED20
Control FeaturesEnable, Active High
Current - Output (Max)667 mA, 667 mA
Efficiency88 %
FeaturesAdjustable Output, Remote On/Off, Remote Sense
ManufacturerP-DUKE Technology, Inc.
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs2
Operating Temperature-40 °C ~ 105 °C (With Derating)
PackageTube
Package / Case6-DIP Module
Power (Watts)20 W
SeriesFED20 W (20 W)
Size / Dimension2.00" L x 1.00" W x 0.40" H (50.8 mm x 25.4 mm x 10.2 mm)
Standard Number60950-1; 62368-1
TypeIsolated Module
Voltage - Input (Max)36 V
Voltage - Input (Min)9 V
Voltage - Isolation1.6 kV
Voltage - Output 115 V
Voltage - Output 2-15 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.