P-DUKE-Technology,Inc
P-DUKE-Technology,Inc FED60-48S12 DC-DC converter
MPN: FED60-48S12

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
P-DUKE-Technology,Inc FED60-48S12 is a DC-DC converter from the FED60 (60W) series. The specified input voltage range is 36V to 75V. The output voltage is 12V. The listed power rating is 60 W. The maximum output current is listed as 5A. The listed efficiency is 92%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 105°C (With Derating). The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm); Package / Case: 6-DIP Module; Number of Outputs: 1; Features: Adjustable Output, Remote On/Off; Control Features: Enable, Active High; Approval Agency: CB, CE, cURus; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Approval Agency | CB, CE, cURus |
| Control Features | Enable, Active High |
| Current - Output (Max) | 5 A |
| Efficiency | 92 % |
| Features | Adjustable Output, Remote On/Off |
| Manufacturer | P-DUKE Technology, Inc. |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 105 °C (With Derating) |
| Package | Tube |
| Package / Case | 6-DIP Module |
| Power (Watts) | 60 W |
| Series | FED60 (60 W) |
| Size / Dimension | 2.00" L x 1.00" W x 0.40" H (50.8 mm x 25.4 mm x 10.2 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 12 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.