ABB-Power-Conversion
ABB-Power-Conversion FW250H1 DC-DC converter
MPN: FW250H1

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
ABB-Power-Conversion FW250H1 is a DC-DC converter from the FW250 (250W) series. The specified input voltage range is 36V to 75V. The output voltage is 24V. The listed power rating is 250 W. The maximum output current is listed as 10.4A. The listed efficiency is 89%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 4.60" L x 2.40" W x 0.53" H (116.8mm x 61.0mm x 13.5mm); Package / Case: Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 10.4 A |
| Efficiency | 89 % |
| Features | Remote On/Off, OCP, OTP, OVP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 100 °C |
| Package | Bulk |
| Package / Case | Module |
| Power (Watts) | 250 W |
| Series | FW250 (250 W) |
| Size / Dimension | 4.60" L x 2.40" W x 0.53" H (116.8 mm x 61.0 mm x 13.5 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 24 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.