XP-Power

XP-Power IP4803SA DC-DC converter

MPN: IP4803SA

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

XP-Power IP4803SA is a DC-DC converter from the IP (3W) series. The specified input voltage range is 18V to 75V. The output voltage is 3.3V. The listed power rating is 3 W. The maximum output current is listed as 700mA. The listed efficiency is 74%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 70°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 0.86' L x 0.36' W x 0.44' H (21.9mm x 9.2mm x 11.1mm); Package / Case: 8-SIP Module, 7 Leads; Number of Outputs: 1; Features: Remote On/Off, SCP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Base Product NumberIP4803
Control FeaturesEnable, Active Low
Current - Output (Max)700 mA
Efficiency74 %
FeaturesRemote On/Off, SCP
ManufacturerXP Power
Moisture Sensitivity Level (MSL)1 (Unlimited)
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 70 °C
PackageTube
Package / Case8-SIP Module, 7 Leads
Power (Watts)3 W
SeriesIP (3 W)
Size / Dimension0.86' L x 0.36' W x 0.44' H (21.9 mm x 9.2 mm x 11.1 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)18 V
Voltage - Isolation1.6 kV
Voltage - Output 13.3 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.