ABB-Power-Conversion

ABB-Power-Conversion JFW050B1 DC-DC converter

MPN: JFW050B1

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

ABB-Power-Conversion JFW050B1 is a DC-DC converter from the JFW (50W) series. The specified input voltage range is 36V to 75V. The output voltage is 12V. The listed power rating is 50 W. The maximum output current is listed as 4.2A. The listed efficiency is 85%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 100°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.40' L x 2.28' W x 0.50' H (61.0mm x 57.9mm x 12.7mm); Package / Case: Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Control FeaturesEnable, Active Low
Current - Output (Max)4.2 A
Efficiency85 %
FeaturesRemote On/Off, OCP, OTP, OVP
ManufacturerABB Power Conversion
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs1
Operating Temperature-40 °C ~ 100 °C
PackageBulk
Package / CaseModule
Power (Watts)50 W
SeriesJFW (50 W)
Size / Dimension2.40' L x 2.28' W x 0.50' H (61.0 mm x 57.9 mm x 12.7 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation1.5 kV
Voltage - Output 112 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.