ABB-Power-Conversion

ABB-Power-Conversion JHW050AF DC-DC converter

MPN: JHW050AF

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

ABB-Power-Conversion JHW050AF is a DC-DC converter from the JHW050 (50W) series. The specified input voltage range is 36V to 75V. The output voltage is 5V. The listed power rating is 50 W. The maximum output current is listed as 8A, 8A. The listed efficiency is 89%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: 3.3V; Type: Isolated Module; Size / Dimension: 2.38' L x 2.26' W x 0.33' H (60.5mm x 57.4mm x 8.4mm); Package / Case: 11-DIP Module; Number of Outputs: 2; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Control FeaturesEnable, Active High
Current - Output (Max)8 A, 8 A
Efficiency89 %
FeaturesRemote On/Off, OCP, OTP, OVP
ManufacturerABB Power Conversion
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeThrough Hole
Number of Outputs2
Operating Temperature-40 °C ~ 85 °C
PackageBulk
Package / Case11-DIP Module
Power (Watts)50 W
SeriesJHW050 (50 W)
Size / Dimension2.38' L x 2.26' W x 0.33' H (60.5 mm x 57.4 mm x 8.4 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation1.5 kV
Voltage - Output 15 V
Voltage - Output 23.3 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.