ABB-Power-Conversion

ABB-Power-Conversion JHW050FY-S DC-DC converter

MPN: JHW050FY-S

Photo not yet available

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.

ABB-Power-Conversion JHW050FY-S is a DC-DC converter from the JHW050 (50W) series. The specified input voltage range is 36V to 75V. The output voltage is 3.3V. The listed power rating is 50 W. The maximum output current is listed as 12A, 12A. The listed efficiency is 87%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Surface Mount. Additional technical characteristics: Voltage - Output 2: 1.8V; Type: Isolated Module; Size / Dimension: 2.38' L x 2.26' W x 0.33' H (60.5mm x 57.4mm x 8.4mm); Package / Case: 11-SMD Module; Number of Outputs: 2; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.

Specifications

ApplicationsITE (Commercial)
Control FeaturesEnable, Active High
Current - Output (Max)12 A, 12 A
Efficiency87 %
FeaturesRemote On/Off, OCP, OTP, OVP
ManufacturerABB Power Conversion
Moisture Sensitivity Level (MSL)Not Applicable
Mounting TypeSurface Mount
Number of Outputs2
Operating Temperature-40 °C ~ 85 °C
PackageBulk
Package / Case11-SMD Module
Power (Watts)50 W
SeriesJHW050 (50 W)
Size / Dimension2.38' L x 2.26' W x 0.33' H (60.5 mm x 57.4 mm x 8.4 mm)
TypeIsolated Module
Voltage - Input (Max)75 V
Voltage - Input (Min)36 V
Voltage - Isolation1.5 kV
Voltage - Output 13.3 V
Voltage - Output 21.8 V

Before ordering

  • DC input range and transients.
  • Output voltage, load current and power.
  • Efficiency, thermal derating, mounting and isolation if required.