ABB-Power-Conversion
ABB-Power-Conversion JRW060A0F DC-DC converter
MPN: JRW060A0F

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
ABB-Power-Conversion JRW060A0F is a DC-DC converter from the JRW series. The specified input voltage range is 36V to 75V. The output voltage is 3.3V. The listed power rating is 198 W. The maximum output current is listed as 60A. The listed efficiency is 91%. The specified isolation voltage is 1.5 kV. The operating temperature range is -40°C ~ 85°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Isolated Module; Size / Dimension: 2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm); Package / Case: 9-DIP Module, 1/2 Brick; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP, OVP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active High |
| Current - Output (Max) | 60 A |
| Efficiency | 91 % |
| Features | Remote On/Off, OCP, OTP, OVP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | -40 °C ~ 85 °C |
| Package | Bulk |
| Package / Case | 9-DIP Module, 1/2 Brick |
| Power (Watts) | 198 W |
| Series | JRW |
| Size / Dimension | 2.40" L x 2.28" W x 0.50" H (61.0 mm x 57.9 mm x 12.7 mm) |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 36 V |
| Voltage - Isolation | 1.5 kV |
| Voltage - Output 1 | 3.3 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.