XP-Power
XP-Power JTF1048D12 DC-DC converter
MPN: JTF1048D12

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
XP-Power JTF1048D12 is a DC-DC converter from the JTF (15W) series. The specified input voltage range is 18V to 75V. The output voltage is 12V. The listed power rating is 10 W. The maximum output current is listed as 417mA, 417mA. The listed efficiency is 88%. The specified isolation voltage is 1.6 kV. The operating temperature range is -40°C ~ 105°C. The mounting configuration is Through Hole. Additional technical characteristics: Voltage - Output 2: -12V; Type: Isolated Module; Standard Number: 62368-1; Size / Dimension: 1.25' L x 0.80' W x 0.40' H (31.8mm x 20.3mm x 10.2mm); Package / Case: 24-DIP Module, 9 Leads; Number of Outputs: 2; Features: Remote On/Off, OCP, OVP, SCP; Control Features: Enable, Active High; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Base Product Number | JTF1048 |
| Control Features | Enable, Active High |
| Current - Output (Max) | 417 mA, 417 mA |
| Efficiency | 88 % |
| Features | Remote On/Off, OCP, OVP, SCP |
| Manufacturer | XP Power |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Mounting Type | Through Hole |
| Number of Outputs | 2 |
| Operating Temperature | -40 °C ~ 105 °C |
| Package | Tube |
| Package / Case | 24-DIP Module, 9 Leads |
| Power (Watts) | 10 W |
| Series | JTF (15 W) |
| Size / Dimension | 1.25' L x 0.80' W x 0.40' H (31.8 mm x 20.3 mm x 10.2 mm) |
| Standard Number | 62368-1 |
| Type | Isolated Module |
| Voltage - Input (Max) | 75 V |
| Voltage - Input (Min) | 18 V |
| Voltage - Isolation | 1.6 kV |
| Voltage - Output 1 | 12 V |
| Voltage - Output 2 | -12 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.