ABB-Power-Conversion
ABB-Power-Conversion NH020G DC-DC converter
MPN: NH020G

Imported data: these values have not been verified against the manufacturer documentation for this exact part number.
ABB-Power-Conversion NH020G is a DC-DC converter from the NH020 (20W) series. The specified input voltage range is 4.5V to 5.5V. The output voltage is 2.5V. The listed power rating is 20 W. The maximum output current is listed as 6A. The listed efficiency is 82%. The operating temperature range is 0°C ~ 115°C. The mounting configuration is Through Hole. Additional technical characteristics: Type: Non-Isolated PoL Module; Size / Dimension: 2.50' L x 0.24' W x 0.55' H (63.5mm x 6.1mm x 14.0mm); Package / Case: 9-SIP Module; Number of Outputs: 1; Features: Remote On/Off, OCP, OTP; Control Features: Enable, Active Low; Applications: ITE (Commercial). These parameters are based on distributor-listed information and should be confirmed before engineering use.
Specifications
| Applications | ITE (Commercial) |
|---|---|
| Control Features | Enable, Active Low |
| Current - Output (Max) | 6 A |
| Efficiency | 82 % |
| Features | Remote On/Off, OCP, OTP |
| Manufacturer | ABB Power Conversion |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Mounting Type | Through Hole |
| Number of Outputs | 1 |
| Operating Temperature | 0 °C ~ 115 °C |
| Package | Bulk |
| Package / Case | 9-SIP Module |
| Power (Watts) | 20 W |
| Series | NH020 (20 W) |
| Size / Dimension | 2.50' L x 0.24' W x 0.55' H (63.5 mm x 6.1 mm x 14.0 mm) |
| Type | Non-Isolated PoL Module |
| Voltage - Input (Max) | 5.5 V |
| Voltage - Input (Min) | 4.5 V |
| Voltage - Output 1 | 2.5 V |
Before ordering
- DC input range and transients.
- Output voltage, load current and power.
- Efficiency, thermal derating, mounting and isolation if required.